10 Tips For Gas Furnace Efficiency – Kitchener Waterloo Homes for sale
Gas furnaces are relatively easy to operate and maintain, but they do require regular maintenance to stay in good condition. Gas furnaces can be dangerous if they are in need of maintenance and you neglect them; for instance if there is a gas leak it could be very dangerous if not addressed early. This article will take a look at 10 maintenance tips for gas furnaces.
1. Check for gas leaks
Gas leaks on gas furnaces are easy to spot, you can tell from gas build up on the floor or from the smell of gas around the furnace area. Gas leaks require a professional to fix the furnace to ensure the safety of the unit.
2. Thermostat working properly?
Have you noticed the house is either really warm or really cold, but the thermostat is set at a comfortable temperature? When a thermostat is not working properly the furnace will not heat the house properly, which makes the unit very inefficient.
3. Control valve turned open?
Is your furnace producing no heat and you can’t figure out what’s wrong? A common problem when getting a gas furnace to run properly is that the control valve is turned off, if the valve is turned off the furnace will not produce heat.
4. When have you changed the air filter?
Regularly changing the air filter is an important part of gas furnace maintenance that should be addressed regularly. Air filters can be purchased at almost any hardware store, and they are not expensive. A dirty air filter will make the gas furnace produce less heat and make it incredibly inefficient.
5. Does your gas furnace need cleaning?
Cleaning is a regular task for proper gas furnace maintenance. Click here for a step by step guide to properly cleaning a gas furnace.
6. When was the last time you checked the tension belt?
If your gas furnace is running loudly and you can’t seem to figure out why the tension belt may be a possible cause.
7. Have you checked the pilot light?
If the pilot light is out the furnace will not work, therefore make sure the pilot light is lit and working properly. The pilot light should be a deep hot blue, but if it is another color then it is not working properly.
8. When was the last time you oiled the motor?
Oil is necessary for proper maintenance on a gas furnace; all you have to do is add a couple of drops, nothing too much. Oil should be added to the motor every season, and when you think the motor needs it.
9. Check the venting regularly
The venting that is hooked up with the gas furnace should be checked regularly for blockages and debris. If the ventilation is blocked it could pose a variety of health hazards including carbon monoxide poisoning.
10. Shutting the system off post cold season
Gas furnaces do need to be shut off after the winter season, and ideally they should be cleaned and the air filter should be replaced. All the above tips should be applied at the beginning of every season for a proper working gas furnace.
This entry was posted on January 28, 2014 by kevinbakerrealestate. It was filed under Buyers, Sellers, Uncategorized and was tagged with condo, first time home buyer, full time realtor, furnace efficiency, gas furnace, home buying, home value, kevin baker, Kitchener waterloo, kwrealestatelife, loft, market update, real estate investing, Remax, sales rep, waterloo ontario, waterloo region school board.